4 way water tap commections

#1
I am looking to buy this product, but I have few questions, how does the pressure here flows when opened all the three or four taps.
4 taps_.jpg
 
#2
It looks all four get some water pressure in equal but a less to next tap. The first tap where hose connected from main line will release high pressure and next would be low and then the third one too and fourth one would be the lowest from all these taps.
 
Last edited:

admin

Administrator
Staff member
#4
It looks all four get some water pressure in equal but a less to next tap. The first tap where hose connected from main line will release high pressure and next would be low and then the third one too and fourth one would be the lowest from all these taps.
This is very true, but this system can be applied where you need multiple lines within a short range, but automatic taps would be best than manual taps. The tap is great and you can use drip lines for your need.
The tap mouth looks it is not suitable for 16mm lateral pipe, please check the diameter and buy it else it will go waste.
 
#5
@admin
Thanks for your clarification, yes it is not suitable for lateral pipe also you have helped me for this in setting and buyomg this product. Where can I get similar in connecting to 16mm lateral pipe?
Any advice really appreciated.
 
#6
I am first time to see this product, since I used 4 way connectors to connect in 4 directions. I see here too the pressure will get lost, but it is good for timers to open the taps in different timings. Did anyone made any type of irrigation using this product?